The laminate floor covering described ind this EPD has a thickness of 7 mm and meets the requirements of the EN14041:2006 and the use classes 31-34 according to /EN13329/ and EN ISO 10874/. In order to enable the user of the EPD to calculate the LCA results for different thickness and use classes, the EPD contains the respective calculation rules.

The products are available under 4 brandnames: Unilin/Pergo/Quick-Step/ Balterio. The Owner of the declaration shall be liable for the underlying information and evidence; the IBU shall not be liable with the respect to manufacturer information, life cycle assessment data and evidences.

Product description/product definition

DPL (Direct Pressure Laminate) floor coverings described in this EPD are produced by UNILIN division Flooring. The floor coverings meet the requirements of /EN 13329/. DPL laminate floorings are made up of a number of layers. On the top side, there is a decor with a transparent, wear-resistant contact surface; in the middle, there is a core layer made of high density wood fibre and on the back side, there is a stabilizing layer to guarantee floor stability, The decorative paper of DPL floor covering can be printed with any design and gives the floor its individual appearance. For placing on the market in the EU/EFTA (with the exception of Switzerland) the Regulation (EU) No 305/211 applies. The products need a Declaration of Performance under consideration of EN/EN14041:2006/ and all have a CE-marking.

Application

The laminate floor covering as described in this EPD is used as a floating modular flooring system for indoor use and meets the requirements of the use classes: 31-34 according to /EN 13329/ and / EN ISO 10874/.

1m² of DPL floor covering with a thickness of 7mm.

Categorie(s): Flooring